Gehl Skid Steer Loader
Gehl Skid Steer Loader
Product description
STAUNCH Mobile Crusher SMC 80
Technical Data
| DIMENSIONS | ||
| Overall Operating Height (mm) | (A) | 141.1” (3584) |
| Overall Length (w/o bucket) | (B) | 110” (2794) |
| Overall Height (to top of ROPS) (mm) | (C) | 71.9” (1826) |
| Ground Clearance to Chassis (mm) | (D) | 8.3” (211) |
| Overall Length (mm) | (E) | 116.2” (2952) w/61” bucket |
| Overall Length (w/o bucket) | (F) | 91.1” (2314) |
| Wheelbase (mm) | (G) | 36.7” (932) |
| Dump Reach (full height) (mm) | (H) | 22.6” (574) |
| Rollback at Ground | (I) | 290 |
| Dump Angle | (J) | 420 |
| Overall Width (mm) | (K) | 53” (1334) |
| Bucket Width (mm) | (L) | 60.6” (1539) |
| Clearance Circle (rear) (mm) | (M) | 58.4” (1484) |
| Clearance Circle (front, w/o bucket) (mm) | (N) | 43.4” (1102) |
| Clearance Circle (front, w/bucket) (mm) | (O) | 69.2” (1758) |
| Seat to Ground Height (mm) | (P) | 33.6” (853) |
| ENGINE | |
| Type | Yanmar |
| Model | 4TNV88 |
| Net Power (kW) | @ rpm 46 hp (34) @ 2600 |
| Displacement (L) | 133 cu.in. (2.19) |
| Hydraulic system | Auxiliary Hydraulics – Standard (L/min) 16.5 gpm (62) |
| Filtration | 4 micron |
| Reservoir Capacity (L) | 8 gal. (30.3) |
| ELECTRICAL SYSTEM | |
| Battery | 12-volt (675 CCA) |
| Starter (kW) | 12-volt (2.3) |
| Alternator | 40-amp |
| CAPACITIES AND WEIGHTS | |
| Rated Operating Load (kg) | 1,350 lbs. (612) |
| Rated Operating Load with opt. | 1,475 lbs. (669) |
| Counterweight (kg) | |
| Tipping Capacity (kg) | 2,700 lbs. (1225) |
| Fuel Tank (L) | 12.4 gal. (47) |
| Travel Speed (km/h) | 6.4 mph (10.3) |
| Operating Weight approx. (kg) | 4,600 lbs. (2087) |
STANDARD EQUIPMENT
• Adjustable Seatbelt
• All-Tach™ Attachment System
• Battery Charge Indicator Lamp
• Controls: T-bar “Hands-only, Hand-Foot
• Coolant Temperature Gauge
• Dual-Element Air Cleaner with Visual Indicator
• Dual Front and Rear Work Lights
• Engine Intake Air Pre-Heater Starting Assist (Manual)
• Foot (T-Bar controls only) and Hand Throttle
• Front Auxiliary Hydraulics with ¾-inch Flat-faced couplers
• Fuel Gauge
• Headliner and Acoustical Interior
• Hourmeter
• Hydraloc System – Brakes and Interlock for Starter,
Lift/Tilt Cylinders, Auxiliary Hydraulics and Wheel Drives
• Independent Hydraulic Reservoir and Hydraulic Oil Cooler
• Lift Arm Support Device
• Low Oil Pressure Light and Buzzer
• Manual Control Hydrostatic Drive
• Number 80K Chain Drive
• Operator Restraint Bar with Armrests
• Power Plug (12V)
• Powerview® Lift Arm
• Removeable Belly Plate and Access Cover
• ROPS/FOPS Level II
• Seatbelt Indicator Lamp and Buzzer
• Spark Arrestor Muffler
• Top and Rear Windows
• Vandalism Lock Provisions
• Visual Hydraulic Filter Indicator
• Warning Lamps and Buzzer – Engine and Hydraulic Oil Temperature
OPTIONAL EQUIPMENT
3-inch Wide Seatbelt – When Required
• Heater/Defroster
• Audible Back-up Alarm
• Horn
• Battery Disconnect Switch
• Hydraulic Coupler Kit
• Bucket Bolt-on Cutting Edge
• Impact-Resistant Door
• Cab Door with Wiper and Dome Light
• Interior Dome Light
• Centrifugal Pre-Cleaner
• Rear Counterweight
• Deluxe Sound Package
• Rear View Mirror
• Diesel Engine Exhaust Purifier
• Single-Point Lift Kit
• Engine Auto-Shutdown System
• Self-Leveling Lift Action
• Engine Block Heater
• Sliding Side Windows
• Fenders
• Strobe Light
• Four-Point Lift Kit
• Suspension Seat
SAFETY IS NO ACCIDENT
Gehl Company reminds users to read and understand the operator’s manual before operating any piece of equipment.
Additionally, be sure all safety devices and shields are securely in place and functioning properly. Gehl Company reserves the right to make changes in design or specifications at any time without notice or obligation.
Reviews
There are no reviews yet.